PM-102A Optical Power Meter (-70 to +10 dBm)
  • Model: PM-102A

  • PM-102A Optical Power Meter (-70 to +10 dBm)

    • Description
    • Releated Products
    The PM Series Optical Power Meter are designed for use with an Optical Source for performing optical loss measurements on fiber optic cables. The PM-102 series are designed for affordable budgest, but meet the basic demands for real world testing. With a smaller size and weight, it’s easy to take these units into any enviroment.

    The PM-102A Optical Power Meter is able to measure 6 wavelengths (850/1300/1310/1490/1550/1625) with power levels ranging from -70 to +10 dBm. The small size, wide measurement range, and dynamic range make the PM-102A an excellent choice for any telecom technician or fiber optic contractor.

    -Reference function
    -Backlight for easy operationin low light
    -Interchangeable(SC/ST/SC) connector


       PM-102A PM-102B
    Calibrated Wavelength(nm) 850/1300/1310/1490/1550/1625
    Detector Type InGaAs
    Connector Interchangeable FC,SC,ST,2.5mm Universal for PC/APC
    Accuracy ±0.35dB±10nW
    Resolution 0.01dB
    Linearity ±5%
    Auto Power Off Yes
    Back Light Yes
    Reference Value Yes
    Measuring Range(dBm) -70 to +10 -50 to +26
    USB Interface N/A
    Data Storage N/A
    Wavelength Recognize N/A
    Tone Detection(Hz) N/A
    Operating Temperature 4 to 122°F(-10 to +50°C)
    Storage Temperature -4 to 158°F(-20 to +70°C)
    Power Supply 3 AAA battery
    Dimension 125 x 65 x 29 mm
    Net Weight 160g

    Standard Accessories:
    FC/PC,SC/PC,ST/PC interchangeable connector(universal 2.5mm connector), manual, travel bag.