| FOCM-003 Fiber Optic Cleaning Machine |
|
SYOPTEK FOCM-003 Fiber Optic Cleaning Machine utilize a highly filtered
stream of pressurized gas in conjunction with a vacuum circuit to create
a high flow rate jet across the surface of the fiber. Once established, 30
micro liters of cleaning solvent is injected into the flow. The entire
cleaning cycle takes less than 1 second and the repeatability of the
cleaning process is absolutely remarkable.
Key Benefits :
✓ Provides rapid, controlled, and repeatable cleaning and removal of contamination from fiber end faces
✓ Eliminates user sensitivity and error
✓ Removes, rather than spreads or smears, loose debris from fiber end faces by foot switch
Key Features:
- Precise non-contact air-solvent-air mixture/sequence to blast and remove contamination particles
- No scratch and quickly and easily remove contamination, dust, lint, oil, and other forms of debris from fiber optic end faces
- Clean various types of both male (patch cord) and female (bulkhead) connector ends
- Ergonomics design with easy one-hand operation/foot switch control, reduce labor intensity
- Comprehensive selection of cleaning tips: SC tip, LC tip, MPO tip, FC tip, ST tip…
Key Benefits :
✓ Provides rapid, controlled, and repeatable cleaning and removal of contamination from fiber end faces
✓ Eliminates user sensitivity and error
✓ Removes, rather than spreads or smears, loose debris from fiber end faces by foot switch
Key Features:
- Precise non-contact air-solvent-air mixture/sequence to blast and remove contamination particles
- No scratch and quickly and easily remove contamination, dust, lint, oil, and other forms of debris from fiber optic end faces
- Clean various types of both male (patch cord) and female (bulkhead) connector ends
- Ergonomics design with easy one-hand operation/foot switch control, reduce labor intensity
- Comprehensive selection of cleaning tips: SC tip, LC tip, MPO tip, FC tip, ST tip…
| Specification | |
| Air Source | External (Compressed Air or Nitrogen, regulated between 40psi~116psi (0.28MPa~0.8MPa)) |
| Solvent Cleans | at least 9500 cleaning cycles for every full tank |
| Maintenance | 100000 cycles per filter replaced |
| Power Source | 110~220V AC (50-60 HZ) @ 2A |
| Cleaning Cycle time | <1s |
| Weight: | 5kg |
| Dimension | - Main Body: L265mm*W205mm*H92.5mm - Cleaning Body (handler): D15mm*L110mm |
| Standard Accessories | LC cleaning tip, SC cleaning tip, foot switch, AC adapter, air pressure regulator |
| Optional | stainless stand for handler |
| Operation Temperature | 10 ~30 degree |
| Storage Temperature | 5 ~50 degree |
