Archive for March 2016

How to remove dirt, dust, debris, grease and oil from connector end faces with F1-7020C Fiber Cleaner.

2016 年 3 月 4 日 Learning Center No comments

F1-7020C Fiber Cleaner replaces the use of solvent or alcohol and wipes. The cartridge is filled with lint-free, clean room-grade cleaning material. Use it to remove dirt, dust, debris, grease and oil from connector end faces. The resilient rubber pad under the cleaning surface prevents scratches.

Slide the cover back to expose the cleaning cloth. Clean up to six connections before advancing the tape to use a clean portion. Tear off material as required. Clean ferrule sides with excess. Using a forward motion, press connector lightly on exposed cloth twice. Inspect connector end face. Repeat if needed. When not in use, the cleaning substance is protected from contamination by a sliding cover. The lightweight cartridge is filled with 20 feet of cloth tape.

Report: Worldwide data center construction market booming

2016 年 3 月 1 日 Industy News No comments

A new published report is titled “A Strategic Assessment of the Worldwide Data Center Construction Market  – Forecast Till 2021.” The report estimates the market to record a total revenue generation of approximately US$54 billion by 2021, growing at a CAGR of approximately 5 percent over the period from 2016 to 2021.

“One key factor that is contributing towards the growth of the data center construction market is the continual increasing demand for data storage,” notes the report’s executive summary. “A number of prominent organizations around the world are forced to add at least ten racks on a daily basis to their current data center storage capacity to accommodate the volume of data that needs to be stored. As such, with such a high volume of data, it is quite evident how absolutely necessary it is to have more data centers constructed as early as possible.

Read more

  Recent Entries »