How to remove dirt, dust, debris, grease and oil from connector end faces with F1-7020C Fiber Cleaner.

F1-7020C Fiber Cleaner replaces the use of solvent or alcohol and wipes. The cartridge is filled with lint-free, clean room-grade cleaning material. Use it to remove dirt, dust, debris, grease and oil from connector end faces. The resilient rubber pad under the cleaning surface prevents scratches.

Slide the cover back to expose the cleaning cloth. Clean up to six connections before advancing the tape to use a clean portion. Tear off material as required. Clean ferrule sides with excess. Using a forward motion, press connector lightly on exposed cloth twice. Inspect connector end face. Repeat if needed. When not in use, the cleaning substance is protected from contamination by a sliding cover. The lightweight cartridge is filled with 20 feet of cloth tape.

Comments are closed.