Once you install and terminate fiber optic cables, it’s time to test them. A test should be conducted for each fiber optic cable plant for three main areas: continuity, loss, and power. To do this, you’ll need a optical power meter. Here’s a quick guide to fiber optic power meters and how they work.
Before Using a Power Meter
There are a few things you should do to prepare before using a fiber optic power meter. First, read the manual and run some practice tests with your power meter before going onto the job site. Next, prepare documents showing how and where all your cables are installed. Don’t depend on memory because you can easily lose track of your cables, especially if it’s a large project. Also, create a worksheet to document your testing data. Some power meters have a memory feature for keeping your data. These come in handy for large projects as well.
Use Safety Precautions
It’s important to follow safety precautions while testing fiber optic cables with a optical power meter. Wear eye protection when working with high-power cables. Even with low-power layouts, it’s wise to check the connectors with your power meter before looking.
Using a Power Meter for Power Measurement
When measuring fiber optic power with a power meter, attach the meter to the cable. Turn on the source of power (transmitter), and view the meter’s measurement. Compare the meter measurement with the specified correct power for that particular system to be sure it doesn’t have too much or too little power. The reason correct power measurement is so important with fiber optic cables is because the system works similar to electric circuit voltage, and the power must be just the right amount to work properly.
Testing Loss with a Power Meter
A power meter is used to test loss, but a test source is needed as well. The meter will measure the optical power that is lost in every part of the cable. The cable is mated with a working reference cable. Two methods used in loss testing are single-ended loss and double-ended loss. With single-ended loss testing, only the launch cable is used. With double-ended loss testing, a receive cable is also attached to the meter.
There are certain loss guidelines to follow for connectors, splices, multimode fibers, and singlemode fibers. You should understand these guidelines as well as the standard formula for calculating loss before getting started. Many training tutorial sites online provide these guidelines free of charge.
Other tools that may be required for the processes above include optical loss test kits, matching reference test cables, mating adapters with hybrids, a visual fault locator or fiber tracer, fiber optic cleaning items, and an ODTR (for outdoor networks).
Fiber optic cables can be of great value to companies if they work properly. Use a fiber optic power meter and other useful tools to ensure that your fiber optic system will operate smoothly around the clock.
Fiberopticcleanings.com stocks a variety of fiber optic cleaning supplies, from one click cleaners to NEOCLEAN-N optical connetor cleaner, from fiber optic cleaning wipes to fiber optic cleaning kit – everything you need for fiber optic cleaning jobs, BUY NOW and get FREE SHIPPING on most items!
Leave a Reply